Allweiler
Allweiler Progressive Cavity AE, AEB, AED & AEDB
Simple, Sturdy Design Low to High Viscosity Fluids Huge Range of Applications
- Product type Progressive Cavity Pumps
- Applications Lubrication Mine Dewatering / Groundwater Sanitary / Food & Beverage Waste Water
- Documents18 brochures
Documents
-
AE11H AE2H AE22H AE4H AE 22V AE 44V2
-
AE.N AEB.N AE.H AEB.H2
-
AEDB2N2
-
AEDB1E2
-
AED2N1
-
AED1E2
-
AE1EAE2E2
-
AE1NAE2N1
-
AEB1EAEB2E2
-
AEB1L2
-
AEB4H2
-
AED E ID Brochure2
-
AE.N AEB.N AE.H AEB.H design ZD ZE2
-
AE11H AE2H AE22H AE4H1
-
AEB1NAEB2N1
-
Allweiler Progressive Cavity Pumps Brochure
-
Allweiler Product Range at a Glance4
-
ALLMARINE1
Allweiler’s Progressive Cavity (PC) range of pumps is used to pump or meter thin to highly viscous liquids, pasty, neutral or aggressive, pure or abrasive liquids, gaseous liquids or liquids that tend to foam. These quality engineered pumps are capable of handling liquids with substantial amounts of solid or fibrous materials suspended within the fluid. They are commonly used in waste water and clarification plants, the chemical, paper and cellulose, soap and grease, paint and coatings, food and beverage, plastics, and ceramics industries as well as in agriculture and in sugar processing, among others. The AE series is available in two variants, the AE1E and the AE1N. The N range has the larger, and stronger joint construction. It can delivery higher pressures, but due to the larger joints is only capable of delivering lower flow rates (see performance specs on the specification tab and via the attached PDF’s). The same is true for the AED and AEDB range.
Available in block mount, or long coupled. Many seal variants available to suit medium being pumped. Range of stator and joint sleeve materials available to suit a broad range of applications Flanges available as DIN or ANSI compliant
Performance Specification AE1E AE1N AED1E AED1N Capacity (L/min) 7,500 4,850 12,000 7,500 Delivery Pressure (Bar) 6 12 8 16 (2 stage) Discharge Pressure (Bar) 16 16 16 16 Viscosity Range (mm 2 /sec) 30,000 30,000 225,000 225,000 Temperature (Degrees Celsius) 150 150 150 150 Admissible Solids (% by Volume) 60 60 60 60 Solids (size and length) Varies Depending on Unit Size Varies Depending on Unit Size Varies Depending on Unit Size Varies Depending on Unit Size Note: “B” as in AEB represents the close coupled, or block style construction. The straight AE is the long coupled design. Available in DIN or ANSI flanges. Seal Type – see data sheets (many variants available). The AE series have a 1/2 geometry and covers the majority of applications, while the AED pumps have a 2/3 geometry.
AE.N-design-RG1 AE1+1H_AE2H_AE2+2H_AE4H_AE-2+2V_AE-4+4V2 AE.N_AEB.N_AE.H_AEB.H2 AEDB2N2 AEDB1E2 AED2N1 AED1E2 AE1EAE2E2 AE1NAE2N1 AEB1EAEB2E2 AEB1L2 AEB4H2 AED_E_ID-Brochure2 AE.N_AEB.N_AE.H_AEB.H-design-ZD-ZE2 AE1+1H_AE2H_AE2+2H_AE4H1 AEB1NAEB2N1
